Update:An aqueous dispersion of Styrene Butadiene Copolymer giving a high performance water resistantSBR bonding agent and admi...
An aqueous dispersion of Styrene Butadiene Copolymer giving a high performance water resistantSBR bonding agent and admixture for adding to sand/cement renders, cementitious flooring screedsand repair compounds. It can be used externally and internally in areas of intermittent or continuouswater contact. It is especially suitable for renders and floors with high abrasion resistance and forpatching and bonding onto substrates of low suction.
Styrene butadiene cement is a latex based, water resistant bonding agent and admixture for use in areas subject to humidity, dampness and continuous water contact. Improves water resistance of cement mixtures by forming a reinforcing polymer that increases long term durability and flexibility of the mix on renderings and floor screeds. Great in landscaping for fixing copings and pier caps that are vulnerable to be dislodged when just using conventional mortar. Styrene butadiene cement can also be used to form a bond bridge when laying slabs that can sometimes be difficult to bond to the bed, such as slate and porphyry. To make up this slurry mix with cement and apply to the back of the slab with a trowel. Styrene butadiene cement is a white liquid, which has numerous uses as an admixture, primer, bonding agent and sealer. Polymer Emulsions of this type have been used extensively over the last 20 years by the building industry as an admixture for cement and concrete applications, including repair and renovation, surfacing of floors and bonding generally. It contains anti-foam to control the density of cementitous mixes.
Substrate requirements: The background must be capable of withstanding all stresses which will be put onto it and contain the appropriate joints. If it is to receive a tipping the background should have a compressive strength greater than 30N/MM² and/or a tensile strength greater than 1N/mm². PREPARATION OF SURFACES Floors should be mechanically prepared, eg scabbled or shot blasted, to give an aggregate exposed surface. Dust should be removed by vacuum, not compressed air. All contaminants such as oil, grease, or any surface laitence must be removed to ensure adequate development of bond when the topping is applied. A water drop test is the simplest method to determine whether water repellent contamination is present. PRIMING Application of a primer coat is necessary to obtain maximum adhesion of the topping or screed. MIX DESIGN The mix design depends upon thickness and intended use.
RUICO is a company specializing in sbr bonding agent, and has cooperation with mining companies in many countries. If you have any needs in this regard, please contact us
Jimmy yuan
Zhejiang Ruico Advanced Materials Co., Ltd. (Stock No.873233)
Add: No.188, Liangshan Road, Linghu Town, Nanxun District, Huzhou City, Zhejiang Province, China 313018
Phone: +86 (572) 2903236
Fax: +86 (572) 2905222
WhatsApp: +86 15088303595
Website: www.ruicoglobal.com
Email:[email protected]